Parameter attribute
①Model: LTJ-01.
②Suitable for pouch batteries, compatible cell size: Cell size: thickness 10~20mm, length 300~340mm: width: 80~150mm.
③Cycle time: ≥10PPM.
④First time yield: ≥99.5% (number of defective produtcs / number of all products).
⑤Failure rate: ≤1%
⑥Misjudgment rate: <2%
⑦Equipment size: About 4 2600*1500*2000mm (L*W*H) (does not contain manual inspection pipeline)
⑧Equipment weight: About 2T
⑨Rated power: 15KW.
⑩Power supply: AC380V.
⑪Air pressure: 0.6-0.8 Mpa, the outer diameter of the intake pipe is 12mm.
⑫Air consumption: 0.2L/min (atmospheric dew point≤-30℃ 3, maximum particle diameter≤1μm, maximum particle concentration＜1mg/m³ 4, oil content: ≤5mg/m³).
⑬Control system: PLC.
Advantages
①The trays are transported through conveyer, disassembled by robot, which saves time and is stable.
②The detection data is bound to the battery QR code and uploaded to the MES system. The equipment is switchable between manual/automatic working mode. The equipment is featured with automatic process control, historical data query and export, real-time display of key parameters, alarm and traceability, and safety protection.
③The pouch cell case forming machine works on 8 channels at the same time, which is more efficient.
Benefits
①Compatible with various types of pouch cell case forming machines.
②The case forming process is carried out automatically, and all parameters are imported into the MES system.
③The film is level and smooth, free of bubbles or wrinkles.
④The speed is up to 14PPM, which is fast and efficient.
⑤The case forming machine works automatically on the folded pouch cell, which is followed by automatic transport of incoming tray through conveyor-automatic retrieving-automatic film applying on both sides-automatic CCD detection width-NG products discharge-conforming products are automatically placed on the conveyor for manual check and assembled
Lead time
①90 days after advance payment